Standard: | IEC61009.1 |
---|---|
Coil Voltage: | 230/400V |
in: | 6A, 10A, 16A, 20A, 25A, 32A, 40A |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
GENERAL
Normal working & installment conditions:
1.Ambient temperature: -5ºC~+40ºC, 24 hours average temperature not exceed +35ºC.
2.Installment plance altitude: ≤2000m
3.Gas relative humidity:not exceed 50% at +40ºC, higher humidity allowed at lower temperature.
4.Pollution degree: 2 class
5.Installment condition: Mounted in the place without obvious impact or shock, no dangerous(explosion) dielectric without corrosive metal or damaging isolation gas(conductive dust).
6.Installment method: TH35-7.5 mounted rail, can be installed in distribution board, case or box. Generally mounted vertically. Tilted angle between mounting face and vertical face not exceed ±5°.
7.Mounted Category: II,III class.
Technical data:
Standard | IEC61009 |
Breaking Capacity | 6KA ; 10KA |
Number of poles | 1P+N(1 module) |
Rated currents | 6,10,16, 20, 25, 32, 40A |
Rated voltage | 110/220VAC |
Rated Tripping Current | 10mA,30mA, 100mA,300mA |
Residual current off time | ≤0.1s |
Characteristic | B ,C |
Electrical endurance | 10000 |
Mechanical endurance | 20000 |
Ambient temperature | -25ºC~+45ºC Max. 95%humdity |
Connection terminal | Fexibe conductor 16mm² |
Rigid conductor 25mm² | |
Type of terminal | Plug-in type |
Width | 18mm /module |
Q 1. what's the payment term?
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ?
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?
A. Normally are cartons, but also we can pack it according to your requirement.
Q 4.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A: Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A: We will accord to international quality standards to inspect every item before leaving our factory.
WENZHOU SANTUO ELECTRICAL CO,LTD.
is one of manufactories that specialize in manufacturing Circuit Breaker,AC CONTACTOR, Thermal Relay and Magnetic Starter, Distribution Box, Voltage Regulator,Solid State Relay.... and is located in Liushi.Wenzhou.China
Contact us
Thanks for your reading.If any product meets your need.Welcome to send us an email or by Wechat and WhatsApp.We are sure your any information can be attentioned without any delay.
Suppliers with verified business licenses