Single Phase Sontuoec 230V 500va AC Voltage Regulator

Product Description

SONTUOEC Single Phase 220V 500VA high Accurate Full AC Automactic Voltage Regulator

Product Description

Function:

The voltage regulator is a continuously adjustable autotransformer with a turns ratio. When the voltage regulator brush slides along the polished surface of the coil by means of the hand wheel main shaft and the brush holder, the turns ratio can be continuously changed. Thereby the output voltage is smoothly adjusted from zero to the previous high.

Adaptation:

The series regulators are characterized by non-distortion waveform, small size, light weight, high efficiency, convenient use, reliable performance and long-term operation. They are used for voltage regulation, temperature control, dimming, power control, etc. , metallurgical instrumentation, electromechanical manufacturing, light industry, scientific experiments, utilities, household appliances, temperature control, dimming, and power control, etc., is an ideal AC voltage regulator.

1.Ambient temperature: maximum temperature + 40 ºC, minimum temperature -15 ºC

2.Altitude: The altitude where the regulator is installed does not exceed 1000 meters

3.Relative air humidity: The monthly average relative humidity of a wet month is 90%, and the average temperature of the month is 25 ºC Power supply voltage waveform:

4.The power supply voltage waveform is a sine wave or similar to a sine wave The installation site is free from gases, vapors, chemical deposits, dust, dirt and other explosive and aggressive media that seriously affect the insulation of the regulator.

5.The installation place should be free of severe vibrations and bumps.

6.Indoor use.

Note! -Selection:Tips This regulator product cannot be used in parallel.

One series: from: 500VA to 10000VA series ; Single Phase 

 

Model		SVC-500VA
Power		500VA
Technology		CPU based Digital Circuit +  Motor
Input	Input Voltage Range	130V-250V
	Input Frequency	50/60Hz
Output	Output Voltage	220Vac
	Output Precision	±3%
Efficiency		98%
Phase		Single Phases
LCD Display Status		Input Voltage/Output Voltage
LCD Display Status		Blue LCD;Indicating phase A,B and C input voltage and output voltage
		Press the switch for 2Second, the LCD display will change to show the PDR's running status, including
		Transformer's temperature for each phase, normal / abnormal
Protection	High Voltage Protection	Yes
	Low Voltage Protection	Yes
	Overload Protection	Yes
	High Temperature Protection	Yes
	Circuit Protection	Circuit Breaker
Smart Cooling System		Yes
Safety Standards		N/M
Operating Conditions	Operating Temperature	-10ºC~+40ºC
	Storage Temperature	-15-45°C
	Operating Relative Humidity	10%RH-102%RH,Non-condensing
Dimension	Machine Size(mm)
	Unit Weight(kgs)

 

Output Deviance	1-3%(Adjustable)
Frequency	50/60Hz
Efficiency	≥98%
Response Time	≤1S
Insulation Resistance	≥5MΩ
Overload	Double Reted Current,One Min
Waveform Distortion	Non-Lack Fidelity Wareform
Protect	Overvoltage,Overcurrent,Lack Phases

Competitive points:

 

1. Volume is smaller than traditional device; Easy to move and install with 4 wheel.

2. With Phase-sequence protection in order to avoid connecting wire wrong;

 

 

3. With more fans ,Heat transfer performance is more better , Temperature rise is lowest ;:load capacity is higher and steady;

 

4. Coil installation construction is more reasonable.

 

5. Intelligent  seperated-adjustable voltage vegulator