6ka MCB&RCCB&RCBO Series Unified Appearance Size Circuit Breaker Outlet

Product Description

Product Description

6ka circuit breaker one series RCBO&MCB&RCCB assembly  :

1.RCBO is mainly used in AC 50Hz(60Hz), rated voltage 230/400V, rated current 6A to 63A low voltage terminal distribution system. RCBO is equal with MCB+RCD function; It is used for electric shock protection and human indirect contact protection, electric equipment protection when human body touching electricity or electric network leak current exceeds stipulated value,and over load and short circuit protection ; It can also be a non-frequency operator in the circuit, wildly used in the residential and commercial district. It complies with standard of IEC61009-1.

2.MCB is used in AC50/60Hz, rated voltage of 230V3, 4 poles 400V, rated current to 63A for overload and short-circuit protection as well as for unfrequented switching under normal case.It is used extensively for industry, commercial and household.This product conform to IEC60898 standard.

3.RCCB is in conformity with the standards of IEC61008.It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunkline.Thus it is suitable to avoid the shock hazard and fire caused by earth leakage.It can be used in circuits up to single phase 240V,three phase 415V,50 or 60Hz.
 

Roduct Over View:

1. Provide protection against earth fault/leakage current and function of isolation

2. High short-circuit current withstand capacity3. Applicable to terminal and pin/fork type busbar connection

5. Automatically disconnect the circuit when earth fault/leakage current occurs and exceeds the rated sensitivity

6. Independent of power supply and line voltage, and free from external interference, voltage fluctuation. 

Specifications

RCBO

	Standard	Unit	IEC/EN 61009-1
Electrical features	Mode		Electro-magnetic type ,electronic type
	Type(wave form of the earth leakage sensed)		A, AC
	Thermo-magnetic release characteristic		B,C,D
	Rated current ln	A	6,10,16,20,25,32,40
	Poles	P	1P+N, 3P+N
	Rated voltage Ue	V	AC 230, 400
	Rated sensitivity I△n	A	0.01, 0.03, 0.1, 0.3, 0.5
	Rated residual making and breaking capacity l△m	A	500
	Rated short-circuit capacity Icn	A	6000
	Break time under I△n	S	≤0.1
	Rated frequency	Hz	50/60
	Rated impulsewithstand voltage(1.2/50)Uimp	V	4000
	Dielectric test voltage at ind.Freq for 1min	kV	2
	Insulation voltage Ui	V	250
	Pollution degree		2
Mechanical features	Electrical life		4000
	Mechanical life		10000
	Fault current Indicator		YES
	Protection degree		IP20
	Ambient temperature (with daily average≤35ºC)	ºC	-5~+40(Special application please refer to temperature compensation correction)
	Storage temperature	ºC	-25~+70
Installation	Terminal connection type		Cable/Pin-type busbar/U-type busbar
	Terminal size top/bottom for cable	mm^2	25
		AWG	18-5
	Terminal size top/bottom for busbar	mm^2	25
		AWG	18-3
	Mounting		On DIN rail EN 60715(35mm)by means of fast clip device
	Connection		From top

MCB
 

Model	MCB
Standard	IEC60898
Pole	1P,2P,3P,4P
Tripping Curve	B,C,D
Rated Short-circuit capacity(Icn)	3KA,4.5KA,6KA,10KA
Rated Current(In)	1,2,4,6,10,16,20,25,32,40,50,63A
Rated Voltage(Un)	AC230(240)/400(415)V
Magnetic releases	B curve: between 3and 5 In
	C curve: between 5and 10In
	D curve: between 10 and 14In
Electro-mechanical endurance	over 6000 cyclesC

RCCB
 

	Standard	Unit	IEC/EN 61008-1
Electrical Feature	Type(wave form of the earth leakage sensed)		AC,A
	Rated current In	A	16,25,32,40,63
	Poles	P	2,4
	Rated voltage Ue	V	230/400
	Rated sensitivity I n	A	0.01,0.03,0.1,0.3
	Insulation voltage Ui	V	500
	Rated residual making and	A	630
	breaking capacity I m
	Short-circuit current I c	A	4500/6000
	SCPD fuse	A	6000
	Break time under I n	s	<0.1
	Rated frequency	Hz	50/60
	Pollution degree		2
MechanicaI features	Electrical life	t	4000
	MechanicaI Iife	t	20000
	Fault current indicator		Yes
	Protection degree		IP20
	Ambient temperature	C	From -25C untill 40C
	(with daily average 35 )
	Storage temperature	C	From -25C untill 70C

 

FAQ

Q 1. what's the payment term?   

A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ? 
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?   
A. Normally are cartons, but also we can pack it according to your requirement.
Q 4.Would you accept to use our logo ? 
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A: Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A: We will accord to international quality standards to inspect every item before leaving our factory.

 

Contact  us
Thanks for your reading.If any product meets your need.Welcome to send us an email or by Wechat and WhatsApp.We are sure your any information can be attentioned without any delay.