Residual Current Circuit Breaker Outlet Motor Circuit Breaker Sizing Chart

• Breaking Capacity: Low Voltage Circuit Breakers
• Operation: Electric Type
• Speed: High-Speed Circuit Breaker
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: STRO1-40L
• Arc-extinguishing Medium: Air
• Installation: DIN Rail
• Structure: ELCB
• Poles Number: 4
• Type: Circuit Breaker
• Function: Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection), RCCB
• Certification: CE
• Standard: IEC 61008
• Ue: 230/400V
• in: 16, 25, 32, 40, 63A
• Pole: 2p 4p
• Certificate: CE, CB
• Transport Package: Inner Box/Carton
• Specification: 100pcs/ctns
• Trademark: SONTUOEC, WZSTEC
• Origin: Wenzhou Zhejiang
• HS Code: 8536200000
• Production Capacity: 2000pieces/Day
• Package Size: 46.00cm * 24.00cm * 33.00cm
• Package Gross Weight: 0.025kg

Product Description

Product Description

These series RCBO 1P+N in the line of AC 50HZ, rated voltage 230V and rated current up to 40A to automatically and immediately cut off power supply once someone suffers from electric shock or leakage current above specified value. It can effectively protect personal security and avoid the damage to equipments.The circuit-breaker can also function as overload and shortcircuit protection and unfrequent changeover of line under normal condition.
The product is conformity with GB16917.1,IEC61009-1 standards.

 

Normal working & installment conditions:
1.Ambient temperature: -5ºC~+40ºC, 24 hours average temperature not exceed +35ºC.
2.Installment plance altitude: ≤2000m
3.Gas relative humidity:not exceed 50% at +40ºC, higher humidity allowed at lower temperature.
4.Pollution degree: 2 class
5.Installment condition: Mounted in the place without obvious impact or shock, no dangerous(explosion) dielectric without corrosive metal or damaging isolation gas(conductive dust).
6.Installment method: TH35-7.5 mounted rail, can be installed in distribution board, case or box. Generally mounted vertically. Tilted angle between mounting face and vertical face not exceed ±5°.
7.Mounted Category: II,III class.

8.Comply with Southern Market or Middle East Market.

Technical data:

Standard	IEC61009  (Electronic type)
Breaking Capacity	4.5KA, 6KA
Number of poles	1P+N(1 module)
Rated currents	6,10,16, 20, 25, 32, 40A
Rated voltage	110/220VAC
Rated Tripping Current	10mA,30mA, 100mA,300mA
Residual current off time	≤0.1s
Characteristic	B ,C
Electrical endurance	10000
Mechanical endurance	20000
Ambient temperature	-25ºC~+45ºC Max. 95%humdity
Connection terminal	Fexibe conductor 16mm²
	Rigid conductor 25mm²
Type of terminal	Plug-in  type
Width	18mm /module

 

FAQ

Q 1. what's the payment term?   
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ? 
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?   
A. Normally are cartons, but also we can pack it according to your requirement.
Q 4.Would you accept to use our logo ? 
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A: Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A: We will accord to international quality standards to inspect every item before leaving our factory.

Thanks for your reading.If any product meets your need.Welcome to send us an email.We are sure your any information can be attentioned without any delay.