Sontuoec St360 Series RCCB Residual Current Circuit Breaker

Product Description

Product Description

ST360 residual current circuit breaker is in conformity with the standards of IEC61008.It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunkline.Thus it is suitable to avoid the shock hazard and fire caused by earth leakage.It can be used in circuits up to single phase 240V,three phase 415V,50 or 60Hz.

Product Over View:   

1.Provide protection against earth fault/leakage current and function of isolation

2.High short-circuit current withstand capacity

3.Applicable to terminal and pin/fork type busbar connection

4. Equipped with finger protected connection terminals

5.Automatically disconnect the circuit when earth fault/leakage current occurs and exceeds the rated sensitivity

6.Independent of power supply and line voltage, and free from external interference, voltage fluctuation.

Model	Electronic type/magnetic type
Residual Current characterstics	A/AC
Pole No	2P/4P
Rated  Current(A)	16A,20A,25A,32A,40A,63A
Rated   Voltage(V)	240/415V
Rated residual operating current	10ma,30ma,100ma,300ma,500ma
Rated conditional residual short circuit current	6KA
Electro-machanical endurance	over 4000 cycles

 

Sandard			IEC/EN61008
Electrical features	Type(wave form of the earth leakage sensed)		Electro-magnetic type, electronic type
	Rated current In	A	A,AC
	Poles	P	2,4
	Rated voltage Us	V	AC 240/415
	Rated sensitivity I△n	A	0.01,0.03,0.1,0.3,0.5
	Insulation voltage Ui	V	500
	Rated residual making and breaking capacity I△m	A	630
	Short-circuit current I△c	A	6000
	SCPD fuse	A	6000
	Rated frequency	Hz	50/60
	Pollution degree		2
Mechanical features	Electrical life	t	4000
	Mechanical life	t	10000
	Protection degree		IP20
	Ambient temperature (with daily average ≤35ºC)	ºC	-25~+40
	Storage temperature	ºC	-25~+70
Installation	Terminal connection type		Cable/U-type busbar/pin-type busbar
	Terminal size top/bottom for cable	mm^2	25
		AWG	18-3
	Terminal size top/bottom for busbar	mm^2	25
		AWG	18-3
	Tightening torque	N^*m	2.5
		In-lbs	22
	Mounting		On DIN rail EN 60715(35mm)by means of fast clip device
	Connection		From top and bottom

Our Services:
 

1. Competitive price
2. Continuance Service and support
3. Good-after service
4. Quality Reliability and Long Product Life.

   


 

FAQ

Q 1. what's the payment term?   
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ? 
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?   
A. Normally are cartons, but also we can pack it according to your requirement.
Q 4.Would you accept to use our logo ? 
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A: Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A: We will accord to international quality standards to inspect every item before leaving our factory

Thanks for your reading.If any product meets your need.Welcome to send us an email.We are sure your any information can be attentioned without any delay.