| Breaking Capacity: | Low Voltage Circuit Breakers |
|---|---|
| Operation: | Electric Type |
| Speed: | High-Speed Circuit Breaker |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier SONTUOEC NFIN 2P,4P Residual Current Circuit Breaker Device RCD Electronic /Magnetic type
Product Description:
NFIN The residual current device (RCD) NFIN is in conformity with the standard of VDE 0664, CEE27 and BS 4293.
It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line. Thus it is suitable to avoid the shock hazard and fire caused by earth leakage. SG-NFIN ELCB is mainly suitable for varieties of plants and enterprises, buildings, construction, commerce, hotels and families. It can be used in circuits up to single-phase 240V; three phase 415V, 50 or 60 Hz.
MAIN TECHNICAL DATA
| Operating time (second) | I n | 2I n | 0.25A(or 5I n) | |
| 0.2 | 0.1 | 0.04 | ||
| Limited value of non-operating current for balance load or unbalance load | 2In | |||
| In minimum value of rated making and breaking capacity | ||||
| In=25 | In=40 | In=63 | ||
| 200 | 300 | 400 | ||
| Rated conditional circuit current Inc(A) | 1500 | 2000 | 3000 | |
| Endurance (times) | 4000 | |||
SPECIFCATION
| Type | NFIN25 | NFIN40 | NFIN63 | NFIN100 |
| Rated current In(A) | 25 | 40 | 63 | 100 |
| Rated operating current for earth leakage I n(A) | 0.03,0.1,0.3,0.5 | 0.1,0.3,0.5 | ||
| Rated non-operating current for earth leakage I n(A) | 0.5I n | |||
| Voltage Un(V) | 240(220)V | 415(380)V | ||
| Pole | 2,4 | |||
Product Over View:
1.Provide protection against earth fault/leakage current and function of isolation
2.High short-circuit current withstand capacity
3.Applicable to terminal and pin/fork type busbar connection
4. Equipped with finger protected connection terminals
5.Automatically disconnect the circuit when earth fault/leakage current occurs and exceeds the rated sensitivity
6.Independent of power supply and line voltage, and free from external interference, voltage fluctuation.
| Sandard: | IEC/EN61008.1 | ||
| Electrical | Type(wave form of the earth leakage sensed) | Electro-magnetic type, electronic type | |
| features | Residual Current characterstics | A,AC | |
| Poles | P | 2,4 | |
| Rated voltage Us | V | AC 240/415 | |
| Rated current (In) | A | 16,20A,25A,32A,40A,63A;80,100A | |
| Rated sensitivity I△n | mA | 10,30,100,300,500mA | |
| Insulation voltage Ui | V | 500 | |
| Rated residual making and | A | 630 | |
| breaking capacity I△m | |||
| Short-circuit current I△c | A | 6000 | |
| SCPD fuse | A | 6000 | |
| Rated frequency | Hz | 50/60 | |
| Pollution degree | 2 | ||
| Mechanical | Electrical life | t | 4000 |
| features | Mechanical life | t | 10000 |
| Protection degree | IP20 | ||
| Ambient temperature | ºC | -25~+40 | |
| (with daily average ≤35ºC) | |||
| Storage temperature | ºC | -25~+70 | |
| Installation | Terminal connection type | Cable/U-type busbar/pin-type busbar | |
| Terminal size top/bottom for cable | mm2 | 25 | |
| AWG | 18-3 | ||
| Terminal size top/bottom for busbar | mm2 | 25 | |
| AWG | 18-3 | ||
| Tightening torque | N*m | 2.5 | |
| In-lbs | 22 | ||
| Mounting | On DIN rail EN 60715(35mm)by means of fast clip device | ||
| Connection | From top and bottom | ||
Packaging Details:
2 Pole 1PC packed in inner box
Master Carton: 100 PCS
Carton size: 53x40x19CM
N.W./G.W.: 23/25 KGS
20' GP Container: 70,200PCS
40' GP Container: Overweight
4 Pole 1PC packed in inner box
Master Carton: 50 PCS
Carton size: 53x40x19CM
N.W./G.W.: 21/23 KGS
20' GP Container: 35,100PCS
40' GP Container: Overweigh
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}