1p+N Plug in Type 6ka Single Phase RCBO Circuit Breaker

• Breaking Capacity: Low Voltage Circuit Breakers
• Operation: Electric Type
• Speed: Normal Type Circuit Breaker
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: STRO1-40L
• Arc-extinguishing Medium: Air
• Installation: Insert
• Structure: ELCB
• Poles Number: 2
• Type: Circuit Breaker
• Function: Overcurrent Protection
• Certification: ISO9001-2000, CE, CB
• Certificate: CE
• Pole: 1p+N
• Rated Current in: a,AC
• Rated Voltage: AC 110/220V; 240/415V
• Rated Current: 10,16,20,25,32,40 a
• Transport Package: Exporting Carton
• Specification: 100pcs/ctn
• Trademark: SONTUOEC, WZSTEC
• Origin: Wenzhou, China
• HS Code: 8536200000
• Production Capacity: 2000PCS/CTN
• Package Size: 46.00cm * 24.00cm * 33.00cm
• Package Gross Weight: 0.015kg

Product Description

18mm width STRO9-40 6KA single phase RCBO Circuit Breaker 1P+N IEC61009 Electrical type up 40A

STRO1-40L Series residual current circuit breaker with overload current protection is in conformity with the standards of IEC61009.It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunkline.Thus it is suitable to avoid the shock hazard and fire caused by earth leakage.It can be used in circuits up to single phase 230V,three phase 400V,50 or 60Hz.

Normal working & installment conditions
1.Ambient temperature: -5ºC~+40ºC, 24 hours average temperature not exceed +35ºC.
2.Installment plance altitude: ≤2000m
3.Gas relative humidity:not exceed 50% at +40ºC, higher humidity allowed at lower temperature.
4.Pollution degree: 2 class
5.Installment condition: Mounted in the place without obvious impact or shock, no dangerous(explosion) dielectric without corrosive metal or damaging isolation gas(conductive dust).
6.Installment method: TH35-7.5 mounted rail, can be installed in distribution board, case or box. Generally mounted vertically. Tilted angle between mounting face and vertical face not exceed ±5°.
7.Mounted Category: II,III class.

Sandard			IEC/EN61009-1
Electrical features	Type(wave form of the earth leakage sensed)		Electro-magnetic type, electronic type
	Rated current In	A	A,AC
	Poles	P	2
	Rated voltage	V	AC 110/220V;  240/415V
	Rated Current :		10,16,20,25,32,40 A
	Rated sensitivity I△n	A	0.01,0.03,0.1,0.3,0.5
	Insulation voltage Ui	V	500
	Rated residual making and breaking capacity I△m	A	630
	Short-circuit current I△c	A	6000
	SCPD fuse	A	6000
	Rated frequency	Hz	50/60
	Pollution degree		2
Mechanical features	Electrical life	t	4000
	Mechanical life	t	10000
	Protection degree		IP20
	Ambient temperature (with daily average ≤35ºC)	ºC	-25~+40
	Storage temperature	ºC	-25~+70
Installation	Terminal connection type		Cable/U-type busbar/pin-type busbar
	Terminal size top/bottom for cable	mm^2	25
		AWG	18-3
	Terminal size top/bottom for busbar	mm^2	25
		AWG	18-3
	Tightening torque	N^*m	2.5
		In-lbs	22
	Mounting		Plug in installing
	Connection		From top and bottom

 

FAQ

Q 1. what's the payment term?   
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ? 
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?   
A. Normally are cartons, but also we can pack it according to your requirement.
Q 4.Would you accept to use our logo ? 
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A: Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A: We will accord to international quality standards to inspect every item before leaving our factory.

Thanks for your reading.If any product meets your need.Welcome to send us an email.We are sure your any information can be attentioned without any delay.