Stro1-40L Series 6ka RCBO with Black Color 1p+N 16A 30mA Circuit Breaker

• Customization: Available
• Standard: IEC61009-1
• in: 6A, 10A, 16A, 20A, 25A, 32A, 40A
• Model NO.: STRO1-40L
• Poles: 1p+N
• Delivery: Within 15days
• Leakage Current: 10mA, 30mA, 100mA, 300mA
• Price: Factory Price
• Transport Package: Inner Box/Carton
• Specification: 1P+N 40A/30mA
• Trademark: SONTUOEC, WZSTEC. STUOEC, SONTUOC
• Origin: Wenzhou, Zhengjiang
• HS Code: 8536200000
• Production Capacity: 6000pieces/Week
• Package Size: 46.00cm * 24.00cm * 33.00cm
• Package Gross Weight: 0.025kg

Product Description

Product Description

STRO1-40L Series 6KA Plug in Type RCBO with Black Color 1p+N 16A 20A 110/220V Circuit Breaker for Electric Leakage Protection

General

    STRO1-4OL Series RCBO is mainly used in AC 50Hz(60Hz), rated voltage 230/400V, rated current 6A to 63A low voltage terminal distribution system, which is equal with MCB+RCD function; It is used for electric shock protection and human indirect contact protection, electric equipment protection when human body touching electricity or electric network leak current exceeds stipulated value, and over load and short circuit protection; It can also be a non-frequency operator in the circuit, wildly used in the residential and commercial district. It complies with standard of IEC61009-1.

 

Specifications

 

Sandard			IEC/EN61009-1
Electrical features	Mode		Electronic type
	Type(wave form of the earth leakage sensed)		A, AC
	Thermo-magnetic release characteristic		B,C
	Rated Current In	A	6,10,16,20,25,32,40
	Poles	P	1P+N
	Rated voltage Ue	V	110/220, 120/240
	Rated sensitivity I△n	A	0.01,0.03,0.1
	Rated residual making and breaking capacity I△m	A	500
	Rated short-circuit current Icn	A	6000
	Break time under I△n	s	≤0.1
	Rated frequency	Hz	50/60
	Rated impulse withstand voltage(1.2/50) Uimp	V	4000
	Dielectric test voltage at ind.Freq for 1 min	kV	2
	Insulation voltage Ui	V	500
	Pollution degree		2
Mechanical features	Electrical life		4000
	Mechanical life		4000
	Fault current Indicator		Yes
	Protection degree		IP20
	Ambient temperature (with daily average ≤35ºC)	ºC	-5~+40(Special application please refer to temperature compensation correction)
	Storage temperature	ºC	-25~+70
Installation	Terminal connection type		Cable/U-type busbar/Pin-type busbar
	Terminal size top/bottom for cable	mm^2	16
		AWG	18-5
	Terminal size top/bottom for busbar	mm^2	16
		AWG	18-5
	Tightening torque	N*m	2
		In-Ibs	18
	Connection		From top
	Mounting		Plug-in type

Construction and Feature:

• Provides protection against earth fault / leakage current, short-circuit and overload
• High short-circuit capacity
• Provides complementary protection against direct contact by human body
• Effectively protects electric equipment against insulating failure
• Contact position indication
• Provides protection against over-voltage
• Provides comprehensive protection to household and commercial distribution systems

 

Normal working & installment conditions:

      1. Ambient temperature: -5ºC~+40ºC, 24 hours average temperature not exceed+35ºC
      2. Installment plance altitude: ≤2000m
      3. Gas relative humidity:not exceed 50% at +40ºC, higher humidity allowed at lower temperature
      4. Pollution degree: 2 class
      5. Installment condition: Mounted in the place without obvious impact or shock, no dangerous(explosion) dielectric without corrosive metal           or damaging isolation gas(conductive dust)
      6. Installment method: TH35-7.5 mounted rail, can be installed in distribution board, case or box. Generally mounted vertically. Tilted                    angle between mounting face and vertical face not exceed ±5°
      7. Mounted Category: II,III class
      8. Comply with Southern Market or Middle East Market
 

 

Our Pros:

1. More than 20-year manufacturing experience
2. Competitive price
3. Continuance service and support
4. Good-after service
5. Quality reliability and long product life

FAQ

    Q1. How does your factory do regarding quality control?

        A. All the products will be 100% checked before the shipment.
    Q2. Are you a manufacturer or trading company?
        A. We are a manufacturer with over 20 years' experience, and we can guarantee our price is first-hand, very cheap and competitive.
    Q3. Which payment terms is available?
        A. We accept TT, 30% deposit and 70% balance agaisnt copy of BL.
    Q4. How's the delivery time ? 
        A. Usually it will take about 25 days for production.
    Q5. Tell me the standard of package?   
        A. Normally are cartons, but also we can pack it according to your requirement.
    Q6. Could I put my logo on it? 
        A. If you have good quantity, it absolutely no problem to do OEM.
    Q7. Do you provide samples? Is it free or extra?Do you provide samples ? is it free or extra ?
        A. Yes, we could offer the samples for free charge, but the express charge need to be paid by the buyers.
    Q8. What is your terms of payment?
        A. We accept TT, 30% deposit and 70% balance agaisnt copy of BL.
    Q9. What is the price of shipping?
        A. Depending upon the port of delivery, prices varies.
    Q10. What is your warranty policy?
        A. 18 months.